Op OC-AthlonXP.com is een artikel verschenen waarin de Palomino 1,53GHz processor met behulp van een Vapochill systeem hard aan het werk wordt gezet. De eerste stap was het inkleuren van de L1 bruggen, iets wat nog wel mogelijk is, maar niet meer zo gemakkelijk gaat als bij de Thunderbird. Vervolgens werd de processor door middel van een Vapochill systeem beneden het vriespunt gebracht. Onder load kwam de temperatuur op ongeveer -3C uit wat de processor voldoende motiveerde om op 1804MHz (11 x 164MHz @ 1,95V) te gaan lopen. Hieronder een stukje over het unlocken van de processor:
had semi-success in unlocking the clock multiplier located on the L1 bridges. AMD has shipped my processor with the L1 bridges in the "open" position (locked). Instead of a fine laser cut, as found on the Thunderbirds, there is now a "laser valley" between the bridges. Therefore, the "pencil trick" will no longer work, as lead will not fill the gap between the bridges. I tried to circumvent this with partial success.
I've received some suggestions via e-mail on unlocking the bridges. One person suggested filling in the L1 "laser valleys" with non-conductive automotive putty, then sanding it down to re-expose the contacts. Then "pencil lead trick" may be effective to bridge the connections.
![]() |